USED FOR A 90 deg. CORNER JOINT

This fitting is a 90° corner joint, with the 48.3mm vertical post passing through the clamp. Typical use is on straight and level guardrail for connecting the mid/lower rail to the vertical at a 90° corner. This fitting can also be used in a similar way on other rectangular structures. This fitting is normally used in conjunction with the 128 3 Way 90 Degree Top Corner when building a 2 or 3 rail guardrail system.

Product Code: SCC42116 SCD48116 Category: S-Clamp System

If you are interested in USED FOR A 90 deg. CORNER JOINT fill in the form below and we will be in contact to set up your order.
Otherwise you can all us directly on

Donegal:
074 914 1700
Mon - Fri: 7.30am - 5.00pm.
Sat: 7.30am - 1.00pm.

Dublin:
01 8473 774
Mon - Thurs: 7.30am - 5.00pm.
Fri: 7.30am - 1.00pm.